-Material: 3D printed SLS polyamide
-Size: 82x54x30mm
-Weight: 100g
-Battery: single 18650 cell
-Contact group: Pipe
-Board: Evolv DNA-60
-Connector: MM510micro
-Landing diameter: 24-26 mm.
-Atomizer landing depth: 40mm.
2020.06.12 11:48
Add side mod
TAG •
- Add side mod,
- vsociety.kr,
- 브소,
- 브이 소사이어티,
- 베이프소사이어티,
- vape Hardware,
- Nicotine,
- Salt,
- Compatible Kits,
- Pod Systems & Cartridge Kits,
- Vape Kits,
- high-end vape mod,
- rta,
- rda,
- 베이프 기기,
- 베이핑 기기,
- 베이프 신제품,
- 베이브 신상,
- 베이프 커뮤니티,
- Electronic cigarette,
- Atormizer,
- Catomizer,
- Clearomizer,
- RBA,
- RDA,
- RTA,
- RDTA,
- Re Build,
- 바텀 피드,
- Bottom feed,
- 스퀑크,
- Sqounk,
- 배터리,
- battery,
- 18350,
- 18650,
- 20700,
- 21700,
- 26650,
- 고방전 배터리,
- Battery,
- 서브옴,
- Sub-ohm,
- 메커니컬 모드,
- Mechanical Mod,
- 멕모드,
- 가변기,
- Regulator Mode,
- 전자담배액상,
- Electronic cigarette liquid,
- 전자담배 공동구매,
IO side mod
Hive RTA
-
이쁘네요 이넘은 살라면 무지하게 고민되겠어요 -
와 퍼플 그라데이션이랑 퍼플 넘나 이쁘네요 -
매립형 은근히 많네요 ㅎ
이녀석도 예쁘군요 -
헐... 내가 나무로 깍으려고 구상했던 디자인이네용
이쁘네요 -
이쁘네요 이거 가격 궁금합니다! -
옵션에 따라 다르다네용 €195-220 정도..... -
얘는 살만할거 같은데용 함질러보까요?!!
-
음...이쁘긴해요 ㅎㅎㅎ
모더가 페메로 문의하라고 하던데....
주문 받으면 만드는것 같더라구요 ㅎㅎ -
일단 요세 많이 나오는 매립 인사이더, 이지 등등 과 컨셉이 틀려 이뿌내요~~ 케이스도 다양하고 ~~^^ 가격도 착하면 좋겠내요 ㅎㅎ -
다 다르네요ㅋㅋ 왠지 선주문받고 커스텀 완성되면 보내주는 모더 같네요ㅋㅋ -
강아지가 인상적입니다ㅎㅎ
- Read More
-
Read More
Explorer XS DNA60 Squonker
TECHNICAL SPECIFICATIONS: – Dimensions: 34.5mm x 45mm x 78mm (L*W*H) Frontal View – Battery Compatibility: 18650 – Bottle System by ARMOR Mods with Custom feeding system – 510 Connector by SVA Mods – Chipset powered by Evolv DNA60 – Fully Cu... -
Read More
Ultroner Sphinx DNA250c
Dna250C chip with max 200W power TC / VW / Bypass capable, preheating, etc.… since DNA250C is the chip in it Works with 2 18650/20700/21700 (18650 comes with 2 converters) What’s not stabwood on it is the full polished aluminum that makes it... - Read More
-
Read More
IO side mod
IO side mod: -Material: 3D printed SLS polyamide -Size: 83x53(49)x30 (27)mm (in wide and narrow places) -Weight: 100g -Battery: single 18650 cell -Contact group: Pipe -Board: Evolv DNA-60 -Connector: MM510micro -Landing diameter: 24.4 mm. -A... -
Read More
Add side mod
-Material: 3D printed SLS polyamide -Size: 82x54x30mm -Weight: 100g -Battery: single 18650 cell -Contact group: Pipe -Board: Evolv DNA-60 -Connector: MM510micro -Landing diameter: 24-26 mm. -Atomizer landing depth: 40mm. -
Read More
Hive RTA
FEATURES: Massive clamp post deck Open juice well design Inset clamp screws 16.4mm delrin drip tip 16.4mm ultem drip tip Ultem bubble tank section Acrylic straight tank section MASSIVE Airflow Approx 20mL tank capacity Stainless Steel constr... - Read More
-
Read More
AIO 67
선주문 만 가능( 총량의 10 % 만) 배송 예정일은 2020 년 9 월 / 10 월 - 델린 본체 - SS 금속 부품 – PC1000 슬라이딩 탱크 9ml – evolv dna60 – 21700 배터리 - 예상 최종 치수 : 85.4 mm / 49mm /24.8mm -가격 209$ - Read More
-
Read More
Noob Box (Mini Billet Box)
Dimensions: 72 x 50 x 20mm at the frame (panels excluded) Lock/Unlock: 5 clicks Stealth Mode: 3 clicks (while unlocked) Practically zero power consumption when not switched. Idle current typical 1.3μA max 3.3μA Incorporates a voltage supervi... -
Read More
ASTON RTA
Aston RTA: Gold-plated positive pin for maximum conductivity High quality Pyrex with a PSU tank supplied as spare in order to have the choice of aesthetics and solidity. The coil is easy to install thanks to the wide passages and the wire ho... -
Read More
ALPHA S 80W
Size:43mm*28mm*87mm Thread type:510 Thread Cell type: 18650 Output wattage:5-80W(VW mode) Output mode:VW/MECH/TC(NI200/TI/SS316/SS317) Resistance range:0.1-2.5ohm Temperature range:212 -572℉/100-300℃ OLED Intuitive display Price ALPHA S STAN... -
Read More
Sarmat by Rus Mod
- Hand-picked hybrid wood blocks - 24mm atty bed - DNA60 board - 18650 battery compatible (not included) - 73*40*25мм - very small - Hand-made in Russia by Rus Mod -
Read More
18350 SIDE BY SIDE ULTEM AND SPALTED BIRCH
2ml Dvarw RTA를 중심으로 설계된.... - Read More
- Read More
- Read More
- Read More
- Read More
